COLLISION STRENGHT OF 5-7 GT WOODEN FISHING VESSEL WHEN BERTH TO THE PIER: AN EFFORT TO DETERMINE THE MINIMUM THICKNESS OF FRP LAMINATION

  • Muhamad Khoirul Anam Program Studi Teknologi Perikanan Laut, FPIK-IPB University
  • Yopi Novita Departemen Pemanfaatan Sumberdaya Perikanan, FPIK-IPB University
  • Budhi H. Iskandar Departemen Pemanfaatan Sumberdaya Perikanan, FPIK-IPB University
Keywords: collision strenght, fiberglass lamination, wooden vessel

Abstract

This is an initial study in order to determain the minimum thickness of FRP (Fiber Reinforced Plastic) lamination on the size of a wooden vessel 5–7 GT (Gross Tonnage). The construction of FRP lamination aims to reduce direct contact of some parts of the ship with surrounding water and to reduce collision impact during berthing process as well especially to the hull. The laminating process is carried out by the skilled boat builders based on their experienced and knowledge. The purpose of this study is to obtain the collision strength of  the ship that can be used as a refrence to determine the minimum thickness of FRP lamination. The descriptive-numeric methods were used in this research. Some data of the sampled vessel such as vessel type, main dimensions, speed and impact power were needed to be analyzed. There were 13 sampled vessels used in this research. The result showed that the vessel was included to towed or dragged gear. The main dimension of the vessel in average were Loa 9.5 m; Bmax 3.2 m; D 1.2 m with displacement tonnage 13,6 ton/m3. The speed of the vessel decreased since the first collision in range of 0.4-1.0 m/s or 20-75%. The collision strength on that time was in range of 7.13-87.48 kN.m. Therefore, the impact strength that will be used as a reference in determining the thickness of the FRP laminate layer on wooden vessels is 87.48 kN.m.

Downloads

Download data is not yet available.

References

Ayodhyoa, A.U. 1972. Craft and gear. Corespondence Course Centre. Jakarta. 66-68 p.

Fauzan. 2018. Perencanaan fender dermaga (jetty) kapal dengan bobot 10000 DWT. J. Ensiklopedia, 1(1):153–157. https://doi.org/10.33559/eoj.v1i1.93

Fyson, J. 1985. Design of small fishing vessels. In Food and Agriculture Organization of the United Nations. England. 80-85 pp.

Iskandar, B.H. & S. Pujiati. 1995. Keragaan teknis kapal perikanan di beberapa wilayah Indonesia (Laporan Penelitian). In Pemanfaatan Sumber-daya Perikanan, Fakultas Perikanan, Institut Pertanian Bogor. Bogor.

Kalangi, P.N.I. 2013. Perkembangan ukuran utama kapal pukat cincin di Sulawesi Utara. J. Ilmu dan Teknologi Perikanan Tangkap, 1(4): 128–134. https://doi.org/10.35800/jitpt.1.4.2013.3828

Ma’ruf, B. 2013. Analisis kekuatan laminasi lambung kapal fiberglass yang menggunakan material multiaxial. J. Standarisasi, 16(1): 31–40. http://doi.org/10.31153/js.v16i1.81

Marasabessy, A. & S. Siagian. 2016. Analisis keretakan pelat zona lambung kapal berbahan fiberglass. J. Kapal, 13(3): 151-152. https://doi.org/10.14710/kpl.v13i3.12400

Marzuki, I., A. Zubaydi, & B. Ma’ruf. 2017. Kajian penerapan aturan klasifikasi pada laminasi struktur konstruksi lambung kapal ikan fiberglass 3 GT. J. Wave, 11(1): 15–22. https://doi.org/10.29122/jurnalwave.v11i1.2055

Novita, Y., N. Martiyani, & E. Ariyani. 2014. Kualitas stabilitas kapal payang Pelabuhan Ratu berdasarkan distribusi muatan. J. IPTEKS Pemanfaatan Sumberdaya Perikanan, 1(1): 28–39. https://doi.org/10.20956/jipsp.v1i1.58

Palembang, S., A. Luasunaung, & F.P.T. Pangalila. 2013. Kajian rancang bangun kapal ikan fibreglass multifungsi 13 GT di galangan kapal CV Cipta Bahari Nusantara Minahasa Sulawesi Utara. J. Ilmu dan Teknologi Perikanan Tangkap, 1(3): 87–92. https://doi.org/10.35800/jitpt.1.3.2013.1410

Patria, A.A. & T.W. Pribadi. 2017. Analisis teknis dan ekonomis pembangunan kapal ikan tradisional ukuran <10 GT berbahan kayu utuh dengan teknologi laminasi kayu mahoni. J. TEKNIK ITS, 6(1): G35–G41. http://doi.org/10.12962/j23373539.v6i1.22839

Purwanto Y., B.H. Iskandar, M. Imron, & B. Wiryawan. 2016. Aspek keselamatan ditinjau dari stabilitas kapal dan regulasi pada kapal pole and line di Bitung, Sulawesi Utara. J. Marine Fisheries, 5(2): 181-191. https://doi.org/10.29244/jmf.5.2.181-191

Ramdhani, M.A., S. Nugroho, & L. Diana. 2019. Analisa performa savonius heliks untuk arus sungai di Indonesia menggunakan metode CFD. Prosiding Seminar Nasional Teknologi Terapan, Politeknik Elektronika Negeri Surabaya, Surabaya, 05 Agustus 2019. 5-9 pp. https://prosiding.polinema.ac.id/sngbr/index.php/sntt/article/view/251

Sarena, S.T., R.Y. Adhitya, C.R. Handoko, & N. Rinanto. 2016. Aplikasi sistem peringatan tabrakan pada kapal berbasis data GPS menggunakan logika fuzzy. J. Ilmu Pengetahuan dan Teknologi, 20(2): 93–104. https://doi.org/10.31284/j.iptek.2016.v20i2.48

Satria, A.Y., D.N. Fattah, D.A. Indrastono, & H.I. Indarto. 2013. Evaluasi geoteknik dan struktur pada dermaga eksisting terminal peti kemas Semarang. J. Karya Teknik Sipil, 2(4): 309-319. https://ejournal3.undip.ac.id/index.php/jkts/article/view/3949.

Sitepu, A.H. & S. Baso. 2016. Performa design stripshield sea chest kapal basarnas tipe FRP36 berdasarkan water intake. J. Riset dan Teknologi, 14(1): 87–96. http://journal.unhas.ac.id/index.php/jrtk/article/viewFile/691/491

Sunardi, Sukandar, E.Y. Sulkhani, & M.A. Rahman. 2019. Repair technique for wooden fishing boats using fibreglass. In IOP Confrence Service Earth Environment Science. 370(1). https://doi.org/10.1088/1755-1315/370/1/012081

Susanto, A., B.H. Iskandar, & M. Imron. 2011. Fishing vessel design and stability evaluation in Palabuhan Ratu (case study of PSP 01 training-fishing vessel). J. Marine Fisheries, 2(2): 213–221. http://103.10.105.65/index.php/jpsp/article/view/6183

Svensson, H. 2009. Protection of bridge piers against ship collision. J. Steel Construction. 2(1): 21–32. https://doi.org/10.1002/stco.200910004

The Overseas Coastal Area Development Institute of Japan (OCDI). 2009. Chapter 5 earth pressure and water pressure. In: National Institute for Land and Infrastructure Management (MLTI). (ed.). Technical Standards and Commentaries for Port and Harbour Facilities In Japan. The Overseas Coastal Area Development Institute of Japan, Tokyo, Japan. 271–311 pp.

Wardani, G.A., Wijayanti, & B.A. Murtomo. 2014. Penataan kampung nelayan Desa Bendar-Bajomulyo Kecamatan Juwana Kabupaten Pati. J. Imaji, 3(3): 227–238. https://ejournal3.undip.ac.id/index.php/imaji/article/download/5651/5439

Yahya, E., A. Rosyid, & A. Suherman. 2013. Tingkat pemanfaatan fasilitas dasar dan fungsional dalam strategi peningkatan produksi di pelabuhan perikanan pantai Tegalsari kota Tegal Jawa Tengah. J. Ilmu dan Perikanan Tangkap Tangkap, 2(1): 56–65. https://ejournal3.undip.ac.id/index.php/jfrumt/article/view/1741

Published
2020-12-31